1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Delta Nuendo Problem?

Discussion in 'Nuendo' started by frob, Jun 26, 2004.

  1. frob

    frob Well-Known Member

    i just upgraded (replaced) my DAW with a new pc specs are:

    3.6 preston
    asuse p4p800
    1gb ram corvair
    m-audio delta 1010
    ect...

    i installed nuendo 1.51 and even did the 1.6 update and well in the -input- -panel- it only shows a maudio device not the
    inputs 1-8 and spdif ive got the newest drivers and im kind of stumped it worked fine on my older 2.6 on a p4pe with 512generic

    any help would be greatly apreasheted.
     
  2. BladeSG

    BladeSG Guest

    Have you enabled the MAudio ASIO driver in Nuendo>Device Setup> VST Multitrack?
     
  3. BladeSG

    BladeSG Guest

    BTW is that a 3.6GHz Prescott P4 on a Socket 478 motherboard?
     
  4. frob

    frob Well-Known Member

    sorry yes prescott not preston

    and yes i have enabeld it, in the before mentioned manner
     

Share This Page