1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

DENON DN990R - professional MD - Error

Discussion in 'Pro Audio Equipment' started by panacea, Dec 1, 2007.

  1. panacea

    panacea Member

    I have one unit NOS (new old stock), when I power it up, unit works - display lights, buttons works. But If I load eny MD 74min or eny other ( I tried new blank 74 min Sony and recorded Sony MD 74min) the unit shows message ERROR in the display immediately. No pick-up moving, I do not hear eny voice of the transport. The unit not load the TOC. If I eject the MD, message goes out too. I founf the error code in the service manual: Error code: ERROR 51-0000, Status: INITIAL STOP, contents: Time-over Error (5sec) of Internal Switch-OFF. I know, that this unit has some switches in the loading mechanism, but I do not know, where I can find the bad one, or an error. Unit is really new, meybe something wrong during shipping? I was packed well in original cartons and arrived with non damaged package. Thank very much you for eny ideas and help.
     
  2. richardallen

    richardallen Guest

    Same Error

    Hi there,

    I have a feeling this must be the type of Disk? I also get the same error. I don't suppose you know how to change between the analog and digital inputs when wanting to record in digital. It's driving me nuts!!

    A user manual would be helpful, but again, nothing on Denon website

    Cheers

    Richard
     

Share This Page