1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

differential inputs

Discussion in 'Pro Audio Equipment' started by jonyoung, Feb 5, 2004.

  1. jonyoung

    jonyoung Well-Known Member

    Joined:
    Dec 31, 2003
    Hi All, I recently had an old FurmanPQ6 parametric modded from unbalanced to balanced. When I attempt to use it via a channel insert, I can see signal getting to the unit via the overload LED at the input level pot, but I can't get return signal to the channel. If I return signal to another channel by way of individual patch cords rather than send/return type, I get signal, but not much. The schematic shows it to be a differential input, ground to pin 1, neg to pin2 and pos to pin 3 on input. Lines 2&3 in turn feed a TLO 76 opamp. Any help much appreciated.
     
  2. jonyoung

    jonyoung Well-Known Member

    Joined:
    Dec 31, 2003
    Oops, apologies to the moderators, I just found an earlier post I made moved to Tech talk (I was headscratching for a minute, thought my computer was playing tricks on me!).
     

Share This Page