1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

digi 003 rack with Korg 168RC

Discussion in 'Recording' started by quadrivium, Apr 18, 2008.

  1. quadrivium

    quadrivium Guest

    Looking for ideas on using a mixer that has 16 channels of Adat I/O with a Digi 003 that has only 8 channels of Adat I/O... thanks for any ideas you might have!
     
  2. Kev

    Kev Well-Known Member

    ?

    convert the second adat on the desk to analog (adda8000)
    and use the 8 analog i/o from the 003
     
  3. Boswell

    Boswell Moderator Distinguished Member

    What mixer is it? If it's something like a Yamaha 01V96, you could mix pairs of channels to each of the 8 auxes which you then output via ADAT to the 003.
     
  4. quadrivium

    quadrivium Guest

    Thanks for these ideas, both of those should work. the mixer is a Korg 168RC. I'm wanting to configure this to record 16 simultaneous tracks going through the mixer and then to the 003. Plan B is to go into the 8 inputs on the back of the 003 and 8 via adat from the mixer.
     

Share This Page