1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Digital Performer need help

Discussion in 'Digital Performer' started by droid, Sep 20, 2005.

  1. droid

    droid Guest

    hey guys/gals.

    I am a DP4 user and have a question, I am a rookie but anyway...

    I have 11 drum tracks and would like to mix them accordingly (all, eq's, gates, comps, reverb etc.) and mix them down to a stereo pair as to not take up so much CPU time, how is that done? also if I wanted to put some verb or compression on all the drums, but didn't want to use a plug-in on each track how do I use one plug-in for all 11 drum tracks, an aux of bus? how is that done, I have never played with aux or bus tracks at all. Many thanks in advance.

    Andrew
     
  2. Todzilla

    Todzilla Active Member

    Create a stereo Aux track, say Aux 3/4

    Bus your drums outputs to an Aux track by designating the output to Aux 3/4

    Put verb or whatever as a plug in to Aux 3/4

    Voila.
     

Share This Page