1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Digital Sync Hell

Discussion in 'Pro Audio Equipment' started by jeronimo, Apr 10, 2002.

  1. jeronimo

    jeronimo Guest

    I was trying to figure that one out: how to set up a Lexicon MPX1, Digi 001 and a Presonus Digimax all together, all digital?
    If I have the Digimax as clock source via lightpipe into the 001 (w/ clock set to digital), 001 out via spdif into MPX1 (w/ clock set do external/digital) then MPX1 spdif out back into the 001. Will I have clicks and pops on the effect return from the MPX1?
    Is someone working w/ a similar setup?
     
  2. jeronimo

    jeronimo Guest

    I donĀ“t believe anyone has this kind of setup!! :)
     
  3. Pete

    Pete Guest

    If this is something your going to stick with for a while you may want to get a word clock, especially if you are looking at adding more digital pieces over time, what you describe should work ...but might not???? try it out,I don't know the Lexi piece well enough to know. I just know when I used to daisy chain stuff it was always a nightmare somewhere. I have A Gen-x 6 by Lucid and Aardark sync 2 both work well , you can pick up a gen-x for around $350.00 this will clock your stuff clean for you. good luck
     

Share This Page