1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Distressor Trick

Discussion in 'Recording' started by e-cue, Jan 2, 2001.

  1. e-cue

    e-cue Active Member

    If you want more bite to your distressor for electric guitar, bass, even vocal- do not plug anything into the stereo link on the back of the unit. Then set the front of the unit to DIS2 (which I'm told boosts even-ordered harmonics) & put it in LINK mode. It adds more distortion. Sometimes the DIS3 works better depending on the instrument. I usually set my attack at 10+, and my release around 2-3.

    E-cue
    (icq #5495501 aka jackercrack)
     
  2. anonymous

    anonymous Guests

    That's a good one. Another of my favorites is to run an RNC in the front at like 25:1, fast attack, fast release, just catching the tippy top of the transient information. Then crank the input so it's clipping the input (just a little bit), back the input off half a number, and run it right at the edge.

    Add the "no cable link trick", and some real magic can come out the back
     

Share This Page