1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

DIY question

Discussion in 'Pro Audio Equipment' started by ProfessorPuke, Feb 11, 2005.

  1. hi,

    i'm building a little curcuit and i got my parts today.

    i ordered a 10uF polypropylene cap, but the one i received says 1.0uF

    1.0uF is not 10uF...... right? ....or is it? i'm a little confused

    thanks,
    delilah

    p.s. where do you order parts from? newark ripped me a new one
     
  2. frob

    frob Well-Known Member

    digikey is pretie good.

    you will find the awesers to all your questions at
    http://www.prodigy-pro.com/forum/index.php
     
  3. tripnek

    tripnek Active Member

    Try the Group DIY forum.

    http://www.prodigy-pro.com/forum/index.php
     
  4. elektro80

    elektro80 Guest

    As microfarads go these days, 1 microfarad is not 10 microfarad.
    :D You are right.
     

Share This Page