1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Does any one know about the digi 001 with out protools

Discussion in 'Pro Tools' started by dark_catt, Jan 7, 2005.

  1. dark_catt

    dark_catt Guest

    I was wondering if any one knows any way to use the protools digi001 without protools. Like if there is a driver for it some where that would let me use it with cake walk or cubase?
     
  2. splurge

    splurge Guest

    Try and find where in your software you set up your inputs and outputs, if your software recognises the 001 you should be alright.

    Maybe someone who's used the 001 can come up with a more definite answer.

    Good luck

    Liam
     
  3. lorenzo gerace

    lorenzo gerace Active Member

    You should install the Wave Driver or ASIO Driver from Digidesign; The Wave is a 2 channel driver that allows other third party softwares to run on Digi's hardware, and can be used for all apps like Sound Forge, Wavelab, Media Player etc..The ASIO is multichannel and will allow ASIO compliant apps (like Nuendo or Wavelab) to use all of the phisical I/O of the 001 just like Pro Tools does.
    I guess you should find what driver is supported by the software you'd like to use and then download and install it from Digidesign Web site.

    Hope this helps

    L.G.
     
  4. EricK

    EricK Guest

    www.digidesign.com--->support--->downloads

    About half way down the page, you will find the the driver links.
     

Share This Page