1. Welcome to RECORDING ORG, a pro audio community focused on recording, mixing and mastering music through use of microphones and electronic recording equipment.
  2. Register NOW and become part of this fantastic Pro Audio community! This message will go away once you have registered.

DPA 4023 & Schoeps CCM series

Discussion in 'Microphones' started by JackHenry, May 27, 2009.

  1. JackHenry

    JackHenry Active Member

    Location:
    South Australia
    Does anyone know if the Lemo connector for the DPA 4023 & Shoeps CCM series are interchangeable??

    By this I mean can DPA 4023 cables be used with the CCM and visa versa??
     
  2. JackHenry

    JackHenry Active Member

    Location:
    South Australia
    Anyone??
     
  3. TheJackAttack

    TheJackAttack Moderator Studio Service

    Location:
    currently Billings
    I don't know. Get out a multi tester and check the pinouts against the specs. If the pin outs are the same and the connector fits then yes its compatible.
     
  4. JackHenry

    JackHenry Active Member

    Location:
    South Australia
    I don't actually have access to any. The query is to help me plan some purchases.
     
  5. TheJackAttack

    TheJackAttack Moderator Studio Service

    Location:
    currently Billings
    Well, LEMO is a standardized connector. There are different sizes but for audio video use I believe most of the differences are # of pins. Email Schoeps for a pinout of the mic you want and do the same for DPA. They will be with you shortly.
     
Loading...
Similar Threads
  1. ctiger
    Replies:
    13
    Views:
    449
  2. Chris
    Replies:
    13
    Views:
    1,840