1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

DPA 4099

Discussion in 'Studio Products' started by audiokid, Jan 23, 2011.

  1. audiokid

    audiokid Staff

    4099G Clip Microphone for Guitar, Dobro, and more


    _0010518.jpg



    DPA-4099-G_medium.jpg

    The DPA 4099 Guitar was designed to help you get studio-grade sound, without installing a pickup system. The DPA 4099 Guitar features a special clip system that attaches to the body of your acoustic guitar — so you won't have to nestle up close to microphone stands, you can play naturally anywhere onstage. Everything about the DPA 4099 Guitar microphone system is optimized for the acoustic guitar. Discreet, elegant, and lightweight, this miking system's also rugged — the gooseneck provides both stable and repeatable positioning of the DPA 4099 Guitar.




    DPA 4099 Guitar Acoustic Guitar Microphone with Clip:


    • Elegant instrument-miking system gives you studio-grade sound on the stage
    • 4099 microphone captures your instrument with accuracy
    • Rugged enough for stage demands, gentle enough for your valuable instruments
    • Can work as a basic XLR microphone or as part of your wireless system

    Elegant instrument-miking system gives you studio-grade sound on the stage
    The 4099 Guitar is a unique clip microphone inheriting the sonic approach from the legendary DPA studio microphones to a new instrument microphone. No multipurpose microphone, the 4099 Guitar microphone and mounting system is meticulously designed and optimized for the guitar family. This is to ensure that you get the best possible mount and audio reinforcement when performing live.

    4099 microphone captures your instrument with accuracy
    Representing years of research and development, the 4099 Guitar system's included 4099 condenser microphone features a supercardioid polar pickup pattern for superb gain-before-feedback. Fully capable of handling the guitar's dynamic range and subtle details, the 4099 lives up to its pedigree, with sound as accurate as DPA's other world-class microphones.

    Rugged enough for stage demands, gentle enough for your valuable instruments
    Despite its tiny, discreet size and its elegant, lightweight design, the 4099 Guitar is extremely rugged. The versatile gooseneck provides stable and repeatable positioning. What's more, the microphone can be easily unclipped and repositioned or moved to another instrument with only one hand, while the mounting system is designed never to mar or scratch the finish of your instrument.

    Can work as a basic XLR microphone or as part of your wireless system
    Through the use of basic adapters, the 4099 is compatible with virtually any wireless system and can also be used as a standard 48V phantom powered microphone via the included XLR connector.

    DPA 4099 Guitar Acoustic Guitar Microphone with Clip Features:

    • Designed to bring studio-grade acoustic guitar sound to the stage
    • Offers superb gain-before-feedback
    • Compatible with wireless systems
    • Flexible and easy one-hand mounting
    • Gently holds to the instrument

    DPA 4099 Guitar Acoustic Guitar Microphone with Clip Specifications:

    • Directional characteristics: Supercardioid
    • Principle of operation: Pressure gradient
    • Cartridge type: Pre-polarized condenser
    • Frequency range, +/- 3dB: 80Hz — 15kHz with 2 dB soft boost at 10-12kHz, first-order low-cut filter at 80 Hz with DAD4099
    • Sensitivity, nominal, +/- 3dB:
    • 6 mV/Pa; — 44,5 dB re. 1 V/Pa
    • S/N ratio, re. 1kHz at 1 Pa (94dB SPL): 71dB
    • Total harmonic distortion (THD):
    • <1 % up to 123dB SPL peak, <1 % up to 120dB SPL RMS sine
    • Dynamic range: 100dB
    • Max. SPL, peak before clipping: 142dB
    • Output impedance: From MicroDot: 30 - 40 Ohm, from DAD4099: 50 Ohm
    • Cable drive capability: 98 ft with DAD4099
    • Power supply: For wireless systems: Min. 5 V - max. 50 V through DPA adapter, with DAD4099: 48V phantom power
    • Power consumption: 1.5 mA, 3.5 mA with DAD4099
    • Connector: MicroDot
    • Color: Black
    • Cable color: Black
    • Weight: 1.27 oz.
    • Microphone length: 1.8"
    • Cable length: 6'
     

Share This Page