1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Recording' started by Matt Tarosky, Aug 25, 2003.

  1. Matt Tarosky

    Matt Tarosky Guest

    I need help,
    I have an AKAI DPS12 digital recorder and supposedly i can link it to my pc with SCSI. Unfortunately its not that easy. I have everything working for the SCSI cable, but when my pc tries to load a driver for the DPS, it always fails. Now, this wouldn't be so bad if I could get some tech assistance from the web, but I cant find jack. Everything on the AKIA website is CD players and blenders.

    The manual has almost nothing about it except a pretty drawing on how to plug the SCSI in the back.

    The unit came with editing software which I expected to find driver software, but neither I nor the computer can locate it on the CD. I don't know what Im doing wrong.
    any advice would help.

    I tried to load this on Windows XP and Windows 98.
    Im using a SCSI to USB cable, but that sofware was loaded fine, I dont think the cable is the problem. help!

Share This Page