1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Audio Terms' started by audiokid, Jun 8, 2010.

  1. audiokid

    audiokid Chris Staff Resource Member

    Mar 20, 2000
    Prince George, BC
    Home Page:
    In wireless microphones, a loss of RF signal, which in turn results in loss of audio or audio that is noticeably noisy. Also refers to a small physical area where there is insufficient RF signal present to obtain satisfactory wireless operation. Dropouts are normally caused by multi-path or signal blockage due to some type of obstruction. Also refers to areas on oxide tape where there is a problem with the coating and where subsequently audio or digital data is not properly reproduced.

Share This Page