Dual Effects Processor for LIVE (Delay+Reverb)

Discussion in 'Tracking / Mixing / Editing' started by ray1018, Jun 13, 2009.

  1. ray1018

    ray1018 Active Member

    Hi,

    Looking for a Dual Effects Processor so...for LIVE purpose...Delay+Reverb.

    May i know is that any posibility to individual control the parameter of each Delay and Reverb? or it's only ONE parameter for the effect call Delay+Reverb?

    Thanks for help.
     
  2. jammster

    jammster Active Member

    Generally a dual effects processor has the ability to process two separate audio sources and feed them individually.

    A multi-effect processor will do for delay+Reverb.

    Most lexicon boxes are the best at reverb. Its been a long time since I have used them since I rely on my 13" MacBook with plugins for my effects these days.

    I believe the LXP-1 /LXP-5 was one of the best boxes years ago. There are still so many products out there, your just going to have to sit down at a store and try them till you find what your looking for.
     
  3. dvdhawk

    dvdhawk Well-Known Member

    The Lexicon MX-200 can do two quality effects at once and you have a switch that lets you run them independently, in series, in parallel. Worth looking into, and really affordable. Nice USB capability too.

    http://www.lexiconpro.com/ProductIndex.aspx?ProductID=12
     
  4. ray1018

    ray1018 Active Member

    MX-200 looks good.
    It's posible to tweak the parameter individual and then Mix together? Or Delay+Reverb just one of the Preset item?

    BTW, You use it in the Studio or Live?
    Thanks a lot.
     
  5. dvdhawk

    dvdhawk Well-Known Member

    It has 2 independent processors, each can do any of the 32 effects - in either order if you're cascading them.

    You can edit 3 parameters for each type of effect

    Reverb [ pre-delay / decay / liveliness ]
    Delay [ time range / feedback / this varies on kind of delay ]
    DeEsser [ ratio / freq range / bandwidth Q ]

    and so on ....

    There's a separate Wet / Dry mix knob for each processor. (Download the info sheet online or manual from that Lexicon link if you want all the details)

    BTW
    I use mine mostly live, but it's suitable for either. For recording I personally tend to mix in-the-box so I use reverb plug-ins more often than not.
     
  6. hueseph

    hueseph Well-Known Member

    That is so cool. That makes me want to get the VST to RTAS plugin just for the Hardware reverb.
     
  7. dvdhawk

    dvdhawk Well-Known Member

    I'm in the same boat with RTAS plug-ins and haven't dabbled in the VST emulation. It would free your computer resources up from doing those hefty reverb algorithms.
     

Share This Page