1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Electrodyne 511

Discussion in '500 series' started by audiokid, Oct 22, 2011.

  1. audiokid

    audiokid Staff

    TABLE
    TR
    TDATTACH1241.vBATTACH
    TD
    TDThe BElectrodyne 511B is a classic two-band discrete transistor reciprocal active inductor equalizer using (1969? 1970?) design technology. The custom inductors and output transformer are made by Electrodyne's original maker, to strict factory manufacturing tolerances as small as 2%. This allows consistent eq performance and repeatability from channel to channel that was not possible in the 60's. Smooth performance and eq response from minimum to maximum gain at all frequencies, provides unusually broad sonic and tonal options not experienced since the 1970's.
    TD
    TR
    TABLE

    h=3Electrodyne 511's specificationshTABLE
    TR
    TD="width: 100%"
    LIST
    *Input: Active balanced discrete transistor impedance converter.
    *Output impedance: 150 ohms
    *+-12 db gain range: Equalize or Attenuate
    *4 frequencies selectable per band. LF: 40, 100, 250, 500hz. HF: 1.5k, 3k, 5k, 10k.
    *PeakShelf function on each band. Shelving at all frequencies, Peaking at 250, 500, 1.5k, 3k and 5k.
    *Distortion: 0.03%typical.
    *Maximum output: +30db at less than 0.8%thd. (+29.5db at 0.06%thd)
    *Frequency response: +- 0.25db, 10hz to 70khz typical.
    *Signal to noise: -85db typ.
    LIST
    TD
    TR
    TABLE
     

    Attached Files:

Share This Page