1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Emu 0404 latency please help

Discussion in 'Recording' started by Abbey, Sep 18, 2005.

  1. Abbey

    Abbey Guest

    I have bought myself an E-mu 0404 soundcard, and I have a small setup where i am using Logic as the recording program. But I have a huge problem with it, the sound is about about half a second delayed when I am recording. Does anyone know about the soundcard or logic and can anybody help me with this?

    I would be reallt gratefull...
    Thank you so much
    Mr Abbey
     
  2. Max_s80

    Max_s80 Guest

    Emu 0404 problems

    I have the same card and use Cubase, but it shouldn't be any different to using Logic. I have had a few probs myself where Cubase reverts to using the standard DirectX driver, this is what gives u the long latency.
    Have a look in the preferences for your sequencer and locate the driver selection. You need to set it to Emu ASIO driver, if you've done it right, you should have a latency of 10ms or less! This is what you want, it's brilliant being able to play soft synths like a normal hardware version.

    Best of luck.

    Max Sinclair
     
  3. Mr-Nice

    Mr-Nice Guest

    That delay is called latency, and you have to lower the audio buffers within the host software to decrease the 'delay' time.

    There is a catch to this sometimes.... The lower you set your audio buffers the more potential for pops, and clicks in the audio playback. Also make sure your soundcard has the latest drivers installed or you can run into some problems.

    I dont know how to use Logic but I am sure there has to be an option that allows you to adjust the audio buffers.

    Hope this helps.
     
  4. AudioGaff

    AudioGaff Well-Known Member

    Assuming your using ASIO, and not WDM, Find the ASIO control panel in Logic. The E-MU ASIO default value is 50ms. Try 10ms and adjust as necesary. New drivers and PatchMix were released last week that in addition to new feaures, offer more fine tuining of lower ASIO latency values.
     

Share This Page