1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

EMU 1212 / Patchmix DSP question

Discussion in 'Recording' started by roirat, Jan 6, 2005.

  1. roirat

    roirat Guest


    Is there a way to set up the output of the patchmix (line outs on EMU 1212) so that they contain only signals from my cakewalk, and not from the EMU 1212 inputs? So far, I have not been able to take the physical inputs to the EMU 1212 out of the patchmix monitor mix.

    Hope that made sense... TIA

  2. AudioGaff

    AudioGaff Distinguished Member

    Feb 23, 2001
    Silicon Valley
    Not sure what or why your trying to do what your doing, but you can mute the inputs on each input strip that would stop audio from going to the main mix. You can also use one of the inserts on your PCI card input strip and then route that to any output that is available.

    Patchmix is a virtual mixer, it is designed to mix all signals into the main mix outputs just like an outboard mixer would.
  3. Chrisyboy

    Chrisyboy Guest

    I'm not totally sure what you want to do, but I made a basic guide on setting PatchMix up for recording, you probably know it all already but it might help!

  4. Big_D

    Big_D Well-Known Member

    Aug 21, 2004
    Quakertown PA
    Nice job on the link Chris. :cool:

    Welcome to RO

Share This Page