1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

End of work....and Phase Cancellation Problem

Discussion in 'Studio Acoustics' started by perry73, Apr 1, 2014.

  1. perry73

    perry73 Active Member

    Feb 8, 2014
    Hi all, Sunday i've finished the acoustic treatment in my home studio and everything seemed to play properly, but when I sat down at the listening position I noticed a phase cancellation on the low.
    From the measurements there's a hole of -10db at 63 and 66Hz
    I followed all the directions to the acoustic treatment, but this thing I do not know how to handle it.
    The superchunk are 60x60x85 of rigid fibreglass
    The first reflection panel are 120x60x5 of rigid fibreglass
    The ceilin is 120x60x10 rigid fibreglass
    Can you help me, I'm desperate ....
    Thanks to all

    Attached Files:

Share This Page