1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Recording' started by ooklah06, Aug 10, 2006.

  1. ooklah06

    ooklah06 Guest

    Hi! my name is David, I'm a new member and a beginner at recording. I just wanted to some advice on equipment for a TASCAM porta02mk11, I just got it and im confused :? on what amp do i use and what type of speaker system is to be used also what type of stereo master recorder should i use. I have a Kenwood double stereo cassatte deck and an aiwa cx-nhma56 digital audio system, and a spider line 6 amp.
  2. Nirvalica

    Nirvalica Guest

    i think you might be a little confused about all this and the process. i don't think you need a master recorder, and recording it onto the kenwood wouldn't make the quality any better.... unless you have some effect between the recorder and master recorder.

    and just use headphones to listen to everything. i wouldn't use a surround sound system, it wouldn't make it sound realistic. headphones would be better. do you have a mic? get a mic to record guitar, or just use the amps headphone output to run into the recorder. either will work. but for vocals, you'll need a mic.
  3. ooklah06

    ooklah06 Guest

    Okay, so what do i use instead of the kenwood?
  4. Nirvalica

    Nirvalica Guest

    nothing..... do you have outboard gear that you will use to master the recordings? otherwise, your wasting time re-recording it on another tape, plus it will degrade the sound a little too.

Share This Page