1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

error 6086 pro-tools... h/w buffer size etc...

Discussion in 'Recording' started by bassplayer1973, Nov 7, 2005.

  1. Frustrated,

    I have windows XP pro sp2. I have the infamous intel 915P chipset. Attempting to run pro-tools LE 6.8 with Mbox 2 .
    No matter what I do I get error 6086 h/w buffer size error.

    1) Will disabling hyperthreading do me any good even though
    I have this non-compatible chipset?

    2) If so, how the heck do I disable hyperthreading, I cant find it anywhere...i need step by step directions please. oh please!

    3) Is there a for sure fix to this problem, or should I give up and return my pro-tools?

    Thank you so much!
     
  2. jonnyc

    jonnyc Member

    If you have a non compatable pc then you're going to have a hard time being productive at all. I highly recommend getting in contact with digidesign and see if you're pc is your biggest problem. One question, were you aware before you purchased pro tools that you may have a problem with your chipset? You ALWAYS need to check compatability with every software.
     
  3. unfortunately,

    i checked compatability for windows XP, but failed to look further into problems with the motherboard.

    thanks!
     

Share This Page