1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

EV RE20.... DOA

Discussion in 'Recording' started by redbort, Mar 5, 2006.

  1. redbort

    redbort Active Member

    can you blow these with 48 volts? :shock:
     
  2. moonbaby

    moonbaby Mmmmmm Well-Known Member

    I have a couple of RE20s, and they're great! Practically indestructible, too.
    I use them with some consoles that have "global switching" for the phantom power and have had no issues...I would think that a mis-wired cable might cause a problem if you applied phantom, but...???
    What are the details of the "incident", pray tell?

    Jim " I Love to Blow Up Stuff Real Good!" Mooney
     
  3. redbort

    redbort Active Member

    not much of a story
    new mic in the mail
    plugged it in, no signal
    turned the phantom off, still no signal
    plugged a 57 to check connections, no problems
    the mic is just dead... must find that shipping box...
     
  4. moonbaby

    moonbaby Mmmmmm Well-Known Member

    Very odd, indeed :(
    I have seen that mic hammer nails, literally! I don't think that even bouncing around in a UPS truck could harm it....something's sure funky here...
     

Share This Page