1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

F/W Mixer Compatability

Discussion in 'Recording' started by dayn72283, May 10, 2007.

  1. dayn72283

    dayn72283 Active Member

    I'm looking into purchasing a Phonic Helix Board 24 sometime in the near future. From the research I've done, this seems like an acceptable choice considering I'm using outboard pre's and the price is so tempting. My only problem is that I can't find anything to tell me whether it is compatible with ProTools LE. Does anybody know if the Helix Board will work in ProTools LE 6.8???
     
  2. Boswell

    Boswell Moderator Distinguished Member

    No, not directly. ProTools only works with DigiDesign hardware (or M-Audio for the M-Powered versions).

    I don't know that Phonic board, but my guess would be that the line inputs are attenuated and then fed through the same preamps as the mic inputs. It would be worth checking this before wondering why your shiny new boutique preamps sound just like a Phonic Helix.
     

Share This Page