1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

fast EZ question from uber noob.

Discussion in 'Recording' started by yoshi8687, Feb 21, 2007.

  1. yoshi8687

    yoshi8687 Guest

    Whats whe best/easiest/cheepest way to record using your computer with a xlr mic? I'm thinking to get an xlr to 1/4 adaptor, then a 1/4 to 3.5mm adaptor but im afriad it will kill quality, or that the mic wont have enough power... Is that good idea or no? And if so please gimme ideas. ty :)
    (My brother gave me a VERY nice mic so im trying recording lol)
     
  2. RemyRAD

    RemyRAD Guest

    yoshi8687!! Under NO circumstances should you plug in any microphone into your computer microphone input other than a "multimedia computer microphone" designed to be plugged into one of those little bastard plugs. If you attempt to plug in your quality microphone through a series of adapters, you run the risk of blowing out your microphone completely. That would make you a very unhappy camper.

    What you need to purchase for your self is an outboard USB or FireWire audio interface that features from 1 to 8, 3 pin "XLR" microphone inputs. THAT IS THE ONLY THING YOU SHOULD PLUG YOUR MICROPHONE INTO TO PREVENT DAMAGE.

    This means, you're going to have to flip plenty of hamburgers to afford one of these devices that will run you around $200 and be worth every penny.

    To make things quicker? Make mine medium rare please?
    Ms. Remy Ann David
     
  3. Kapt.Krunch

    Kapt.Krunch Well-Known Member

    Hmmmmm Remy...you mean when I take my Neumann and plug it into my ART Tube MP, then to a cable to the Radio Shack XLR-to-1/4" impedence converter plugged directly into a 1/4"-to-1/8" adapter sticking out the back of the Soundblaster to use the Soundblaster "Mic" setting....that it may cause signal degradation and other problems which may result in a poor recording?

    Darn :oops: ....learn something new everyday.

    Kapt.Krunch :wink:
     
  4. RemyRAD

    RemyRAD Guest

    Kapt.Krunch, don't make me whistle into my telephone to cut you off. You freak! You phone freak! Don't I get 1 phone call??

    Now that I think about it, I think that would make for a very interesting sound effect?? Neumann + ART + tubes + Sound Blaster card into microphone input = Real Distortion for the current distortion generation. I mean they need something different from what we're used to working with?

    I'll go for improper bias any day.
    Ms. Remy Ann David
     

Share This Page