1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Firepod question on Headphone mix sends?

Discussion in 'Recording' started by Nik_the_barber, Jan 12, 2006.

  1. Well I figured out my pop and click problem. I juut needed to switch to ASIO drivers. But Today during my first session with the Firepod. I was having trouble setting up a headphone mix. Im using Sonar % producer edition, and I had the Cue send plugged into my Headphone amp, and I had the aux sends sent to a "headphone" channel. But I could not get a mix going. It was like they where only hearing the master output. I had all my headphone aux sends set to pre. The problem is that there is no way of knowing wich out to assign the headphone mix to. Because the outputs are named Like Firepod Asio L 1, 3, 5, 7. If anyone has any idea how to help. It would be appreciated.

    Another thing..... When I was tracking today. I coundt do a live mix as they where recodring. When I adjusted the Fade levels. All I could hear was the preamp levels. The fader levels won't effect anything until after its recorded. But say I would like to switch over to play back mode rather then input. It would not allow them to hear there pre recorded tracks. So I mean I coud not mix while they where tracking. Any thoughts on this?

Share This Page