1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Firewire 400 w/ laptop users, Advice please

Discussion in 'Converters / Interfaces' started by t2roc, Mar 15, 2007.

  1. t2roc

    t2roc Guest

    I just got a Fireface 400. I want to get a not too expensive laptop that works well without any (chipset or other) compatability problems. Please tell me what U R using and also what doesnt work well. (Also please include if it will be necc. To get a dedicated Firewire 400adapter, to plug into PCMIA card.)
    Will be using Cubase LE software for now. Im also going to get a Guitar Rig 2, Dont know if that will pose any other problems as far as power and Ram capability. Any tips and tricks much appreciated,Thanks lads Michel
     
  2. JoeH

    JoeH Well-Known Member

    Sony Vaio. Used 'em for years, built solid, good chipset and deployment of features. Comes with both FW & USB 2.0. A no-brainer.
     
  3. RemyRAD

    RemyRAD Well-Known Member

    Joe, I think there are some problems with some laptops when trying to use a FireWire device that requires bus powering? Many of the laptops do not offer bus powering from the FireWire interface, such as my Hewlett-Packard DV 8000. It features a 4 pin FireWire port, that does not support bus power and if one should require bus powering, a FireWire PCMCIA card that allows for an external power supply for bus powering may be purchased for under $50 at your local computer stores. I also purchased one of those for just that particular reason to use with my Hewlett-Packard laptop.

    So, t2roc you need to know if your external FireWire audio interface can be powered from an external power supply?

    Externally yours
    Ms. Remy Ann David
     
  4. t2roc

    t2roc Guest

    thanks, it has a plug, so theres no issue with power.
    M
     
  5. JoeH

    JoeH Well-Known Member

    FWIW, I would never expect to use any power fucntions with a laptop on the firewire cable, whether it's 4 pin or 6. Just not good practice. I always plug in the FW & USB Devices in to its AC/DC wall wart unit, and run it that way. Anything else is asking for trouble, IMHO.

    And by the way, I've never been able to get my laptop to power ANY Peripheral anyway....either I'm doing something wrong, or my laptop has been protecting itself from my own incompetance. :roll:
     
  6. RemyRAD

    RemyRAD Well-Known Member

    JoeH I've not had any problems bus powering my Roland/Edirol UA-1X USB line level audio device or my M-AUDIO TRANSIT line level device along with USB LED lights and fans and 2.5 inch external bus powered hard drives on my Hewlett-Packard DV 8000? But they dropped the ball on that 4 pin FireWire connector without offering bus powering on that. How consistent! WTF?

    I can't believe that you could be capable of operator error?? I thought you're perfect? Maybe I'm doing something horribly right?? Nahhh?

    Horribly confident
    Ms. Remy Ann David
     

Share This Page