1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Firewire card-For zed r16

Discussion in 'Converters / Interfaces' started by Localhero, Apr 19, 2011.

  1. Localhero

    Localhero Active Member

    I have a allen and heath zed r16 and it has a 6 to 6 pin and 6 to 4 firewire lead with it.I want to run it with my pc.Used to use delta 66.

    Do I need to replace this card and put a firewire card in?If so any good ones recommended or do they all do the same job?

    Thanks all.
  2. TheJackAttack

    TheJackAttack Distinguished Member

    Replace which card? The Delta? If you have a spare PCI slot then just buy a Texas Instruments chipset firewire card and put it in. If you don't have a spare slot then you'll have to remove something and the Delta is fair game since the Zed is far superior.
  3. Localhero

    Localhero Active Member

    Thanks John yep i was thinking of taking the delta out as Im not going to use that anymore.
    Will the texas inst do a good job for me Im using Sonar x1 pro?

  4. TheJackAttack

    TheJackAttack Distinguished Member

    The TI chipset isn't for the DAW (Sonar), it's so the computer speaks to the interface properly. It will work fine with Sonar.
  5. Localhero

    Localhero Active Member

    Thanks John your a good one ;-)

Share This Page