1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Guitar Rig 2 troubles

Discussion in 'Guitars' started by mercurix, Dec 27, 2006.

  1. mercurix

    mercurix Active Member

    I'm setting up Guitar Rig on a mono channel and sending my guitar through a DI to my MBOX to ProTools and I can hear both the distorted sound and the clean DI sound. I dont know if anyone has had a similar situation or could give me a hand. I'm sure its the dumbest thing too, hehe. Thanks.
  2. Kev

    Kev Well-Known Member

    and what is the problem ?

    ... you don't want to hear the clean DI sound while playing ?

    the M-Box has that mix control on the front panel
    this allows you to hear the input directly to the headphones ... hardware monitoring idea

    Guitar Rig is a plug ?
    this gets applied once the signal is inside PTLE and then gets fed to the headphones.

    So I think on playback you will hear just the Guitar Rig sound
    given that the plug remains on the track insert.

    I could be way off base here .... :(

Share This Page