1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Guitarport/Guitar Rig/Acid Problem

Discussion in 'Guitars' started by bankievr6, Mar 31, 2009.

  1. bankievr6

    bankievr6 Guest

    I'm using the Line6 Guitarport to input from my guitar. I have Guitar Rig 3 set up for my effects, and I'm trying to record directly into Sony Acid Pro 7.0. Guitarport is set up as my primary audio device, with the line-out on my soundcard going to the "In" of the guitarport, then the output of guitarport going to my monitors. Everything seems to be working fine, except that the sound isn't being recorded in acid. The output meter in the audio track in acid is registering my input (i see the green bar bouncing up and down as i strum), and I can hear the sound through my monitors, but the track records as if there was no sound. None of the three products addresses integration well in their documentation and I'm totally stumped. Any suggestions?
     
  2. Greener

    Greener Guest

    Arm the track and make sure it's pointed to the source?
     
  3. bankievr6

    bankievr6 Guest

    The track is armed, and in the audio device options, ASIO Guitarport is assigned. I set up an audio bus and enabled Guitar Rig as the Amp FX module.
     

Share This Page