1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

HD24 FirePort 1394 error 'Unreadable from this Computer'

Discussion in 'Recording' started by ray1018, Mar 29, 2007.

  1. ray1018

    ray1018 Active Member


    i just bought the FirePort 1394.
    But finally i found a problem while i transfering using it.
    The problem as below:

    -Using a Brand New H.Disk without format the H.Disk,straight away slot into HD24 and use it for recording.
    -Recording successful.
    -My friend took the h.disk and transfer it thru FirePort go into his PC.Device prompt on the desktop and seccessed on transfering Wav.
    -After that, i use the FirePort again to do the transfering into my Mac.
    -Problem is Prompt error 'The H.Disk Unreadable From This Computer'...

    Anyone know what's the problem?S'ld i format the H.Disk (Mac format) before slot into HD24?

  2. sheet

    sheet Well-Known Member

    You installed a new hard drive into a slot on the ADAT and did not format the disc in the ADAT? That's your problem.

    When you hook the drive to the Fireport, you will get a prompt to format it from your Mac. DON'T do that. Just ignore the drive, open the FST software that you should have installed, and the drive and it's contents will show up.

    I am not hammerin' on you here, but all of this is very clear in the manual and Read Me documents on the software disc.
  3. MadMax

    MadMax Well-Known Member

    Nope... bro, your problem is Mac OS-X...

    Check the link!!


    Bookmark the site and visit it often... I'm stuck with doing ftp right now... SUX!
  4. ray1018

    ray1018 Active Member

    all right bro,will keep trying after updated the firmware.s'ld be the problem...Thank You very much...
  5. tnjazz

    tnjazz Active Member

    That's weird. I'm on 10.4.9 and I transferred some stuff thru my Fireport last night with FST Connect. I didn't notice anything different at all.

    I wonder what the incompatibility is? I don't know that this is related though. Have you tried using Marc Brevoort's tools? They've helped me transfer files off damaged HDDs that FST Connect wouldn't read properly.

  6. ray1018

    ray1018 Active Member

    wow..really that complicated?i don't think so..anyway will look into it.thanks

    Do anyone know how to install the firmware update of HD24 thru Mac?just plug the Ethernet cable?need to set the ip address?
  7. sheet

    sheet Well-Known Member

    Again, read your manual. Page 77. Set your TCP up.
  8. ray1018

    ray1018 Active Member

    I found that the Installer Disk and Web description that the FST software Designed For Mac OS 10.3 and the latest update is 10.4.6...It din't mention about 10.4.9 and even i can't find the update!

  9. MadMax

    MadMax Well-Known Member


    That's what I was telling you... There IS NO fix for 10.4.9!... yet. just keep checking their site... eventially it will get done and posted. Until then.. you gotta ftp in.
  10. gdoubleyou

    gdoubleyou Well-Known Member

    Try downloading the 10.4.9 combo installer, I've noticed various problems on the audio/video forums. I expect Apple to post updates for the update this week.

  11. ray1018

    ray1018 Active Member

    10.4.9 combo installer??where s'ld i get it?
  12. ray1018

    ray1018 Active Member

    Hi everybody...

    Finally i'd decide to install the OS 10.4.7 without update the OS software in the 2nd slot H.Drive (i'm using PPC G5) to browse my FST and Export the wave files into my 1st slot H.Drive and Do every Editing work in OS 10.4.9!!

    Now work fluence...as long as the 2nd slot h.drive available to share the capacity while i boot my 10.4.9 1st slot h.drive...i think this is the most convinient way for me.

    Hope it's help.

    p/s: hope it's oso work in Partition H.Drive which in a Single Drive.

Share This Page