1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

headphone mix

Discussion in 'Recording' started by sammyg, Nov 9, 2004.

  1. sammyg

    sammyg Active Member

    Hey All,

    curious to know how people are setting seperate headphone mixes (different ch/track levels for different artists recording simultaneasly) in their DAW's when they are staying internal, running no analog mixer,going straight in and just main mix to master channel controller (which is feeding monitors).


  2. shock

    shock Guest

    If I had to, I would be using the aux sends in ProTools, sending the signal to different outs of the 192. You can even have a setup where you're able to eq everything seperately for each musician - virtually anything is possible. I still like to do monitor mixes with a mixing console, though, with real faders and stuff.
  3. LittleDogAudio

    LittleDogAudio Active Member

    I'm with Shock.
    You can certainly use the aux sends (in the box) to setup a pretty comprehensive cue send but using even a small mixer makes the job flow a lot faster Imho.


Share This Page