1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Headphone mixer for Firestudio

Discussion in 'Recording' started by Drewslum, Feb 2, 2008.

  1. Drewslum

    Drewslum Active Member

    I've got a Firestudio and I want to get some sort of a headphone mixer so that at least 4 people have separate headphone mixes while tracking. I pretty sure the Firestudio can do this. Any recommendations?

  2. bent

    bent No Bad Vibes! Well-Known Member

    If your DAW can route multiple aux sends or submixes to the outputs then yes.
    However, you'll need four separate HP amplifiers.
  3. Drewslum

    Drewslum Active Member

    I'm using Logic Pro 8. How do the HP amps connect to the interface?
  4. bent

    bent No Bad Vibes! Well-Known Member

    I do not own a Firestudio, but I'm thinking this would be your best bet:

    From the manual:
    General Purpose Outputs: These stereo TRS balanced outputs can be used for
    any purpose, and derive their output signal from your DAW, the FIRESTUDIO
    Control Console software, or the optional MSR remote. There are no level
    attenuators on the FIRESTUDIO for these outputs.
  5. Drewslum

    Drewslum Active Member


Share This Page