1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

HELP Building LA2a question?

Discussion in 'Pro Audio Equipment' started by coldsnow, Feb 5, 2005.

  1. coldsnow

    coldsnow Active Member

    Hi,
    I am building an LA2a from the book "HOW TO BUILD A TUBE COMPRESSOR". I have one question through. On the C 7a-d, it appears as though he has replaced the can with four 47uF @450V electrolytic caps on the drawing. However, these caps are run to the C7a-d Can. But if you are replacing the C7a-d can with the four caps you wouldn't have the can.
    HELP
     
  2. Kev

    Kev Well-Known Member

    nah
    I can't see that

    C7 ... a/b/c/d
    all look to be in different parts of the circuit and I can;t see how you can sub ALL of them for a single larger cap.

    The original LA2 may well have had a single can that contained four separate capacitors.

    don't confuse this with a single large cap.
     
  3. coldsnow

    coldsnow Active Member

    Hi,
    They run to the can on the back of the chasis.
     

Share This Page