1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

HELP HELP Wrong workclock!!! HELP

Discussion in 'Recording' started by audioplace, Feb 13, 2007.

  1. audioplace

    audioplace Guest

    hi, recently, i work with digi002 console and m-audio octane. i create a session on 48Khz, but an mistake in the setup of the octane (was setting up on 44.1K.) cause a pitch up of audio files. now i have the audio files in 48Khz in internal sync mode, but the audio is pitch up. only when i put in adat sync mode and octane is 44.1 the audio is ok. how i can to export files in correct pitch and sample rate?. (sorry for my english)


Share This Page