1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

help.m audio black box

Discussion in 'Recording' started by tomodrive, May 13, 2007.

  1. tomodrive

    tomodrive Guest

    this unit lights up and all buttons work on all parameters but there is no input signal being recieved,guitar or mic. no signal light, no clip light with volume up.input ,output and mix knobs do nothing.any ideas before i take it back? ive tried everything that the troubleshooting part of the manual says to try
     
  2. hueseph

    hueseph Well-Known Member

    And, you are plugging this into what? What software are you using if you are plugging into your computer? What kind of computer are you using, Mac or PC?
     
  3. tomodrive

    tomodrive Guest

    m audio black box problems

    im plugging into a pc / windows xp but i really havent gone that far yet.i thought this was also a stand alone unit so i plugged in my guitar and headphones and got nothing. i sent the main outs to powered speakers and got nothing.the drum signal is audible but very low when speakers are ckanked.i tweaked the gtr/drumbal parameter which also did nothing.this unit was actually the floor model at georges music,last one,but i was impatient and had to have it.
     
  4. hueseph

    hueseph Well-Known Member

    Sorry to say, it sounds dead to me. I would take it back.
     

Share This Page