1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Help with MOTU 2408 and ADAT lightpipe

Discussion in 'Recording' started by Jack Dupp, Mar 27, 2011.

  1. Jack Dupp

    Jack Dupp Active Member

    I have a MOTU 2408 Mark 1 and 2-Adat blackface and 2-Adat XT-20s. I am trying to get the Adats into my computer but I can't seem to find a way to get Cubase or Reaper to see the optical inputs. I also don't have a manual for the 2408 and have not had any success locating one via google, yahoo, etc. Can anyone help me to get my Adat tracks into my computer digitally? I am also looking for at least 2 and up to 4 Adat 56-pin Elco to 1/4" snakes. Again no success with google, yahoo, Sweetwater, Guitar Center etc. Thx
     
  2. TheJackAttack

    TheJackAttack Distinguished Member

    This is a pro audio interface but kind of a newbie question. Manuals are almost always available for download in pdf form from the manufacturers. Any manufacturer.

    MOTU.com - Product manuals

    You may have to sign up (free) to access the downloads. This is the first place to start. A quick search found this:

    You will also have to learn about clock syncing which involves setting a "master" and the other ADAT devices as "slave."
     
  3. Jack Dupp

    Jack Dupp Active Member

    Thank you for your response. The pfd manual from Motu is for the 424 pci. Mine is the original 2408 with the 324 pci card. When I try to configure the inputs after enabling routing, there are no inputs or outputs displayed. Any ideas? I truly appreciate the help. I am getting frustrated and I have a project coming up when I will need this issue fixed. Thx
     
  4. TheJackAttack

    TheJackAttack Distinguished Member

    The process should be the same. The main difference from the 324 to the 424 is how many units can be plugged into the PCI card. If you have gone into the 2408 and activated it's ADAT port for Master then you go to your Blackface or whatever and set it to slave the clock from the 2408. If you are using the word clock over bnc then you need to do the same and also remember to set what the clock source is.

    Now, within Cubase you need to go into the VST manager and actually activate the inputs and outputs you wish. They do not activate all by default. The Cubase pdf manual is available for free download and is searchable. Page 170 of the current v.5 manual but the process is the same in ALL versions.
     
  5. TheJackAttack

    TheJackAttack Distinguished Member

    I'm guessing your issue is with the second paragraph.
     
  6. Jack Dupp

    Jack Dupp Active Member

    Thx Again. Actually, I don't know how to access the 2408 master port and the pci 324 doesn't allow me to enable inputs or outputs. The configure interface arrow is visable but when pressed, its blank so I can't use it. I was able to enable routing. I have pressed the interface options button and it does "press" but doesn't do anything. Looking for Cubase manual now Thanks again.
     
  7. TheJackAttack

    TheJackAttack Distinguished Member

    In my first post is the 2408 manual. There is no manual for any of the pci cards just drivers. Cubase is available at the Steinberg website.
     
  8. TheJackAttack

    TheJackAttack Distinguished Member

    Cubase 5 :  | http://www.steinberg.net/

    All the other versions and documents are available from that same spot more or less.
     
  9. bouldersound

    bouldersound Real guitars are for old people. Well-Known Member

    I've gotten Lightpipe into a 2408MK2/PCI-324, but it's been a couple of years. Tomorrow night I'll try to remember to look at the MOTU software to see if there's some detail that will help solve your problem. I'm leaning toward it being MOTU's software that has to be set correctly.
     
  10. Jack Dupp

    Jack Dupp Active Member

    Thx.any help would be appreciated. My next step is to try to scrape together enough money for a new interface. I'm leaning towards a motu 828 hybrid or RME HDSP9652 or maybe a Focusrite SaffireLQ56. Any feedback with which of these interfaces are superior or more stable would be greatly appreciated. Thank you
     
  11. TheJackAttack

    TheJackAttack Distinguished Member

    The MoTU interfaces are good items. It is also possible that if you purchased the 2408 used that it is malfunctioning. There has to be a way to activate the ADAT from the MoTU gui or sometimes those are deactivated and controlled by the DAW program instead. Hopefully Boulder can come up with a sequence for you.
     
  12. Jack Dupp

    Jack Dupp Active Member

    No help from Motu

    I purchased the Motu 2408 new in 1999. It has been in storage since mid 2000 as I was out of the U.S. on business. The card and interface e were in a temperature controlled environment.Both units appear to be functioning properly. Motu has said that there is no PDF manual available for download and that the paper version is out of print. I did register the piece when new and Motu has verified my purchase but no help seems to be forth coming from them. So much for customer service. If anyone has knowledge of a PDF manual for the 2408 mark 1 or has a printed copy for sale at a reasonable price, please let me know. Thank you.
     

Share This Page