1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Help with recent recording

Discussion in 'Recording' started by BerksCountyBoy, Dec 7, 2010.

  1. I taped a local band and only used 1 1/4 inch cable out the back of the sdb thinking it was a headphone mono feed. It was only the right side of the recording no sound out of the left speaker. Is there a way to split it to both the left and right side using a splitter y cable or way to do it in audacity after I load it into my itunes library?
    Any help would be great
    Thanks
     
  2. Davedog

    Davedog Distinguished Member

    Hopefully all the information is available on the right side only.....though I doubt it. Your best bet is to get the proper cable and redo your project.

    If all of the recording IS on the right side only, make it a mono recording.
     
  3. RemyRAD

    RemyRAD Guest

    Dave he's indicating it already is one MONO. So, you need dual channel MONO (sometimes erroniously refered to as STEREO just because it's comming through 2 speakers) You just need to copy right channel and paste it into left channel. THEN... you stick on a dab of very short plate reverb abieance to add some random phase "verb" to create a little stereo feel to fix your accidental abortion and make them think it's a reel baby.

    "Y" cables? Because they are there.
    Mx. Remy Ann David
     
  4. Davedog

    Davedog Distinguished Member

    Yeah. Thats what I meant. One source.....both sides. Sounds like it was taken off a board live.
     

Share This Page