high and low shelf

Discussion in 'Mastering' started by audiolover71, May 24, 2005.

  1. audiolover71

    audiolover71 Guest

    Is it possible to have both high and low shelf in a remix?
     
  2. Michael Fossenkemper

    Michael Fossenkemper Distinguished past mastering moderator Well-Known Member

    Is this a joke?
     
  3. audiolover71

    audiolover71 Guest

  4. Michael Fossenkemper

    Michael Fossenkemper Distinguished past mastering moderator Well-Known Member

    anything is possible, what are you trying to achieve?
     
  5. audiolover71

    audiolover71 Guest

    When you add a lfe is there a way to keep clearer sound
     
  6. JerryTubb

    JerryTubb Guest

    1. Go to High Pass Filter, set corner freq at 250Hz
    2. Go to Low Pass Filter, set corner freq at 125Hz
    3. That should give you the Desired effect.

    If that fails, invert the phase on the left channel, hit the mono button.

    The Transparency should be Zen like !

    What instrument is it... maybe a three string monochord? 8)
     
  7. audiolover71

    audiolover71 Guest

    I'm using a stereo mix, remixing it to my liking. making a lfe effect without taking out the treble or pitch.
     
  8. TrilliumSound

    TrilliumSound Active Member

    :shock: ... :D
     
  9. Michael Fossenkemper

    Michael Fossenkemper Distinguished past mastering moderator Well-Known Member

    that's nice.
     
  10. TrilliumSound

    TrilliumSound Active Member

    Sorry guys, I'm lost...is this the Twilight Zone ?
    :shock:
     
  11. audiolover71

    audiolover71 Guest

    No you're not walking in a land between light and shadow I want to take a stereo mix remix it so my surround system won't have the same sounds coming from each speaker. I want to have the seperated effect.
     

Share This Page