1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Hooking Mixer to Computer

Discussion in 'Recording' started by jgoeke, Nov 22, 2004.

  1. jgoeke

    jgoeke Guest

    Hi, I have a M-Audio delta/66 Omni Studio computer based recording system. I just bought a yamaha EMX 2000 Mixer to hook my drum mics into and use for my band. I do not know how to set up the mixer so it goes through the omni studio into my pc. Right now I have intrument cables going from the mixers stereo Output L and R into my omni studios direct outs 1 and 2. I have no idea what to do. Can anyone help me thanks.
     
  2. David French

    David French Well-Known Member

    I guess you meant to say that you have the mixer's stereo outs going into the Omni Studio's direct ins 1 and 2? This is perfect if you just want to record the stereo mic of the drums. If you want to record fout\r separate channels of the mixer, you can try using the inserts on the mixer channels (if your mixer has them) as outputs feeding your direct inputs on the Omni.
     
  3. inLoco

    inLoco Active Member

    or use the main out and the alternative 3/4 if he has them equalized and adjusted with the faders
     

Share This Page