1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

How do i hear my playback in garage band

Discussion in 'Recording' started by tempest1226, Nov 27, 2006.

  1. tempest1226

    tempest1226 Guest

    Hey everyone. I know i know. Still just garage band one. But ijust had a few questions. 1. How do i hear my playback in garage band through my KRK monitors if i have them hooked throuugh my DAW, a digi002 with protools. 2. How can i have seperate drums tracks if im using a software instrument such as the ones included with the garageband or my drums from hell superior. 3. How recording a real instruments through my digi002 into garage band and what settings must be on the digi002 in order to do this properly. 4. Why is it a regular with recording where whenever you get excited because you think you finally figured something out, something else doesnt work or isnt set right. hahahahaha. the last question is a joke. But any help would be great though. as always -Ron
     
  2. tempest1226

    tempest1226 Guest

    anybody. haha
     
  3. gdoubleyou

    gdoubleyou Well-Known Member

    Make sure you have it selected in the audio preferences. also be aware that by default it will use channel 1/2 for the output pair.

    8)
     
  4. tempest1226

    tempest1226 Guest

    i have the osx audio prefrences as the digi002 for the output volume but i can see the problem is in garage band now because in the audio preferences in garage band the only options for the input/output volumes are built-in speakers. How do i make the digi002 and audio option in the garage band preferences?
     
  5. gdoubleyou

    gdoubleyou Well-Known Member

    Garage Band uses Core Audio the system level standard. PTLE uses DAE.

    You need to download the crappy Core Audio drivers form the Digidesign site.

    8)
     

Share This Page