1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

How to get rid of echo between mixer and recorder?

Discussion in 'Recording' started by Claudia, Nov 2, 2013.

  1. Claudia

    Claudia Active Member

    Nov 2, 2013
    Earth, end of the milkyway on the left.
    Hello every one, i am new here because i was searching for people who are intrested in recording or dslr filming and audio to.

    I am now busy with finding the levels between my dslr camera (nikon d5100) and the Zoom R8.

    The problem where i walk against is that when i record with my mic the R8 is recording great and i dont have any aditional noises.
    But when i connect the R8 to my camera then i get a aditional echo and/or a electro/distortion sound.

    The only thing i can think of is that the output of the R8 is balanced and the input of the d5100 is unbalanced. I used a cable that goes from 2 mono jack's to 1 mini stereo jack.


    When i use the sampler from the R8, i dont have that echo or metalic sound.

    What is the solution of this problem ?
    Because i hear it many times on youtube movies to from people with home recordings.
  2. Kurt Foster

    Kurt Foster Distinguished Member

    Jul 2, 2002
    77 Sunset Lane.

Share This Page