1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

I can listen to the radio in my monitors!

Discussion in 'Monitoring / Headphones' started by JamesG, Aug 30, 2005.

  1. JamesG

    JamesG Guest

    so i moved into my dorm and my roomate and i started to track some acoustic guitar on my mbox, when i go to turn on my event tr5s i pick up some radio signal, it's pretty clear to. so.... anyone on how to get rid of it?
     
  2. dpd

    dpd Active Member

    My experience has been that it's getting into the mic inputs. Try disconnecting the mic, leave the cables in place, the gains set the same and record. Is the noise still there?

    If not, pull the inputs from your power amp and listen for the noise.

    Gotta find the entry point 1st.
     
  3. JamesG

    JamesG Guest

    bump....
     
  4. McCheese

    McCheese Well-Known Member

    Try putting on a tin foil suit. It keeps the voices out of my head.

    But yeah, try and isolate it. If you pull everything but the power cables and it's still going, try a power filter. Maybe rent one first to see if it helps.
     
  5. JamesG

    JamesG Guest

    i tried the tin foil suit and i realized that it has trs and not xlr ins so it didn't work

    but ya i'll try and isolate it
     
  6. dpd

    dpd Active Member

    If you have any unbalanced lines running in your system, I'd look there, too.

    I have to deal with a 50 KW ERP transmitter 800 feet away from my studio. We ended up enclosing the whole thing in copper mesh screen AND using balanced lines for everything. Then, dumping crappy hardware (e.g RANE headphone amps, etc) that can't deal with RFI. No worries now.
     
  7. JamesG

    JamesG Guest

    wow that sucks, ya i'm using unbalanced cables, i'll try some trs
     

Share This Page