1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.


Discussion in 'Recording' started by obe1ben, Aug 23, 2006.

  1. obe1ben

    obe1ben Guest

    Hello, my names Ben and im a newbie at recording so bare with me :p
    What exactly does a product like the Digidesign 192 I/O do?? You see, my friends dad has 3 for his studo and I was just curious what they exactly do.
  2. RemyRAD

    RemyRAD Well-Known Member

    Ahhhhh well those are Digidesigns 8 inputs of hi-def 192khz, 24 bit interfaces. 3 gets you 24 tracks of I/O or inputs and outputs. It's for use primarily in a ProTools system.

    I know guys that are still using the 48kHz versions because their plug-ins don't work with the 192kHz variety but their recordings and mixes still sound outrageously good even at 48kHz. So your dad's friend has a bitchin' system. Start saving your $$$.

    Not a ProTools user
    Ms. Remy Ann David
  3. obe1ben

    obe1ben Guest

    haha stupid question but where are the inputs??
  4. pr0gr4m

    pr0gr4m Well-Known Member

    In the back.
  5. obe1ben

    obe1ben Guest

    are they those small holes which say 1a 1b 2a 2b etc.. ?
  6. pr0gr4m

    pr0gr4m Well-Known Member

    Nope...it's those other ones labled +4 and -10. You need to have a snake with a DB25 connecter on one end. The DB25 plugs into the 192. On the other end of the snake you may have 1/4" or XLR connectors to plug into a board or some other devices.

Share This Page