1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

I was going to ,,,but I won't....uh..... ..... uh...

Discussion in 'Recording' started by Jbon, May 13, 2004.

  1. Jbon

    Jbon Guest

    I had planned to paste a thing I wrote up in notepad, but since its been discussed and answered here already, I shall simply start with the tiny, off-subject question:

    #1 what the best thermal paste? and

    (alredyansurd,thnks):

    #2 the best controlsurface/soundcard/inoutinterfaceboth midiand analog/digital?whatever they're 'spoztobecalt
    thanks

    I suppose the reason I have posted this question anyway which I came here to post and found already answered........uhHh is cuzItsOK to continue the thread by latecomer-thoughts-as-well-etc.&thanks
     
  2. BladeSG

    BladeSG Guest

    1. Arctic Siver 5

    2. digidesign 002

    or 002R with Command 8, it'll cost abot the same for either.
     
  3. BladeSG

    BladeSG Guest

    1. Arctic Siver 5

    2. digidesign digi002

    or digi002R with Command 8, it'll cost abot the same for either.
     
  4. Jbon

    Jbon Guest

    thanks!I bet I needn't even bother checkin at

    I probably can guess the outcome of a local-office-depot check...no that it'd stop me.... how much worse do you suppose that which they'll try to offer to me to replace said choice of thermal paste will likely be?...... I don't mind waiting for the ups or fedx if thats the verdict,just if anyone could say... I'm tempted to not even bother with local stores. although, it looks as if I'd oughta be able to search& find it.. maybe if I was connected locally, geek-wise, which i am not...I'd probably already have had a preference about the paste, interesting thing, I used to be an "Insulator".. "thermal engineer" we'd jokingly call ourselves, as apprentices..Nasty work, mostly..anyway,I live in Decatur Alabama 20 miles from the WernerVon Brown rocket-town of Huntsville.
    thank you for the snappily-acquired knowledge I'd asked for, verycool!
     
  5. BladeSG

    BladeSG Guest

    Are you saying you don't know if this Arctic Silver 5 is a good choice or not?

    If you're gonna use it for a PC CPU then do a Google search for Arctic Silver 5 and read the reviews
     
  6. Jbon

    Jbon Guest

    Idon't doubt the quality , i am just jostling the idea of asking local stores for it, thats all....see I don' really expect to find it.... but if you are saying there's no other choice, I can accept this...
     
  7. BladeSG

    BladeSG Guest

    OK then for other brands try

    1. OCZ
    2. Cool Master
    3. Geil

    :)
     
  8. Jbon

    Jbon Guest

    'Preciate it, Blade

    Well , tell me , do you rate these close to the same, I appreciate any of your reading knowledge you may have I admit not to have done all that much except the forums I am just about to the point that I think forum intel is about as good as it gets, potentially ...And let me thank youse for all the consideration if I may be bodacious oranything , ever in my out landish questions, some of the thing s I write and rea later make me wanna check-up. but I don'mean anythin by my presumtion ... most folks are evr soglad to help& sometimes i'd be tryin to get at the most odd pointof interest to me, Any way i just wanna say that i am of the opinion this kind of community is some of the best possible, when those mind meetin epinfinee things does happen.... and overall too.., of course

    thanks agin I may be gone while I cd player/daughter/install/etc.
     
  9. BladeSG

    BladeSG Guest

    If you meant how do I rate these thermal pastes:

    then I have used only the Arctic Silver products on all the PC's I've built except Intel PC's where I have retained the factory supplied Heatsink and fan setup.

    I have heard good reports about the OCZ product.
     

Share This Page