1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Inward Connections The Impulse

Discussion in '500 series' started by audiokid, Oct 22, 2011.

  1. audiokid

    audiokid Staff

    TABLE
    TR
    TDATTACH1250.vBATTACH
    TD
    TDBProgram EqualizerB

    Get the classic warmth and sweetness of vintage passive EQ designs for your 500 series lunchbox with the Inward Connections Impulse. Great on vocal, bass, or in stereo pairs for the mix bus. The VF-600 discrete amp block used in the Impulse will give that extra size and smooth openness that you crave in your mix!
    TD
    TR
    TABLE

    h=3Inward Connections The Impulse's featureshTABLE
    TR
    TD="width: 100%"
    LIST
    * Hi Mid Band Controls¤ o Frequency switch selects 4K, 8K, 12K, 16K, 20KCS
    *-16dB cut level
    * Mid Band Peak Controls
    *Frequency switch selects 1K, 2K, 3K, 4K, 5K, 8K, 10K, 12K, 16KCS
    *Bandwidth control
    *+14dB boost level
    * Lo Band Shelf Controls
    *Frequency switch selects 20Hz, 30Hz, 60Hz, 90Hz, 120Hz
    *-16dB cut level
    *+14dB boost level
    * Bypass switch
    * VF600 discrete amp blocks
    * Differential balance input transformer
    * Balance output transformer
    * Double-wide module fits in standard 500 series rack slots configuration mechanically and electrically
    * Powder coating in gunmetal gray
    LIST
    h=3Inward Connections The Impulse's specificationsh
    LIST
    * Input Impedance: 600 ohms balance
    * Output Impedance: 600 ohms balance
    * Frequency Response: +- 0.5dB to 50KHz
    * Output Signal to Noise: -95dB or greater
    * THD + Noise: .01% @ 1KHz+4dBu
    LIST
    TD
    TR
    TABLE
     

    Attached Files:

Share This Page