1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Inward Connections The Nitro

Discussion in '500 series' started by audiokid, Oct 22, 2011.

  1. audiokid

    audiokid Staff

    TABLE
    TR
    TDATTACH1263.vBATTACHTD
    TDBTwo Band Parametric EqualizerB

    The BInward Connections NitroB is a fully parametric 500 series 2-band EQ using the new VF-600 amp blocks for adding warmth and power to your mix. Use for individual tracks where you want to open the top end up, or to pull out problem frequencies. Very simple and versatile design. Charge up your tracks with the Nitro!TD
    TR
    TABLE


    BInward Connections The Nitro's featuresB

    TABLE
    TR
    TD
    LIST
    * Low band frequency range 35Hz to 1KHz
    * High band frequency range 560Hz to 16KHz
    * Maximum boostcut +- 20dB
    * Range of bandwidth adjustment 0.16 to 2.0 octave
    * Bypass switch
    * VF600 discrete amp blocks
    * Differential balance input transformer less
    * Balance output transformer
    * Fits standard 500 series slot configuration mechanically and electrically
    * Powder coating in gunmetal gray
    LIST
    BInward Connections The Nitro's specificationsB


    LIST
    * Input Impedance: >20K ohms balance
    * Output Impedance: 600 ohms balance
    * Frequency Response: +- 0.5dB@20Hz to 50KHz
    * Output Signal to Noise: -95dB or greater
    LIST
    TD
    TR
    TABLE
     

    Attached Files:

Share This Page