1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

JoeMeek VC1Q schematic available

Discussion in 'Electronic Repair Modifications DIY' started by cuelist, Feb 2, 2003.

  1. cuelist

    cuelist Guest

    For anyone interested in weird and wonderful circuits, I have the schematics for the JoeMeek VCQ1 - micpre / processor.

    It features the "meequalizer" and a photo-electric compressor.

    Let me know you're interested and I'll send it over.

    Mats

    mr.karlsson@bredband.net
     
  2. Kev

    Kev Well-Known Member

    Is that the VC1Q or the VC1Qcs (current sense)

    I have the second and would like a schematic.

    .... but I am most interested in the schematic for the VC1Q with the TX input. I had a few emails with Ted Fletcher and he said they dropped the TX in favour of the current sense input as it was lower noise ... and I'm sure there was another reason ???

    Still it would be interesting to see the before and after schematics.
     
  3. cuelist

    cuelist Guest

    Well the TX (transformer) model is the one I have schematic for! Will send it over to you!

    Mats
     
  4. gyraf

    gyraf Guest

    Mats,

    I'd be very interested to see that also..

    Jakob E,

    jakob (at) gyraf (dot) dk
     
  5. Gabriel Sousa

    Gabriel Sousa Member

  6. cjenrick

    cjenrick Active Member

  7. Tony dB

    Tony dB Guest

  8. Mark Blasco

    Mark Blasco Guest

  9. buttercup

    buttercup Guest

  10. Gabriel Sousa

    Gabriel Sousa Member

    Thanks Mats Karlsson ..

    now who can make the PCB Layout ??

    thanks
     
  11. Test Point

    Test Point Guest

    OK...me too
    Thanks
    TP
     
  12. Test Point

    Test Point Guest

    Oops....sorry, forgot the address...
    tvendt@attbi.com
    It's too early on a Monday
    TP
     
  13. chrissugar

    chrissugar Guest

    HiMats!

    Please send me the schematic too.

    chrissugar
     
  14. ciminosound

    ciminosound Guest

    Thanks Mats!
    Gerry
     
  15. HiString

    HiString Guest

    Mats,

    This is too good an opportunity to pass up. Thank you smile.gif

    ChrisO :cool:

    locomo@bigpond.com
     
  16. gus

    gus Guest

    could you send it to me as well?

    gussmalley (at) hotmail (dot) com
     
  17. Me too, please Mats!

    I have their little PC front end but that only has an SSM 2017 as front end. The opto-compressor contains an LDR that looks a lot like the cheapest one in the Maplin catalog...but these things do look alike!

    Thanks in advance!

    BjornZetterlund@dial.pipex.com
     
  18. IJR

    IJR Active Member

    Thank You!
     
  19. Underbart!

    Someone must have spent a while drawing that one...

    beerchug.gif
     

Share This Page