1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Little Help Please lol

Discussion in 'Recording' started by L. Veracity, Feb 18, 2006.

  1. L. Veracity

    L. Veracity Guest

    aiight I have no idea what all I need to use my mic and mixer on my computer

    mic: AKG Perception100
    mixer: Behringer Europak UB502
    cable: LiveWire Advantage

    I have another chord but I don't know what it's called, it has the red and white plug like the ones you plug to your TV to use a DVD or VCR, and on the other end it has the regular small jack to the back of my computer

    what else do I need and how do I need to plug it all up, in order to get sound going to my recording program on my computer?
     
  2. L. Veracity

    L. Veracity Guest

    UPing for sleepers...
     
  3. Thedave

    Thedave Guest

    An interface...?
    Get rid of the stereo inputs and find a USB or Firewire interface for 200 bucks if you are recording one or two trax at a time. If you need more inputs then it will cost you a bit more but nonetheless dont use the stereo inputs (red and white cables). Also, dont run your mic through the mixer when going into the computer, use it to "mix" with. Also, I'm not sure what an AKG perception 100 is, I checked AKG's site and there is no such thing, however if it is a condencer mike be sure to get a preamp or a phantom powered INTERFACE, if dynamic, the pre is still good to have.
    Take care
     

Share This Page