1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Live Monitoring in Logic

Discussion in 'Logic' started by Guitarfreak, Mar 1, 2009.

  1. Guitarfreak

    Guitarfreak Well-Known Member

    This is going to be a loaded question with lots of info, so I'll split it up into two parts...

    What I WANT To Happen
    I have an Audix mic in front of my guitar cab recording and sending to my computer then into Logic. I want to be able to hear the click/drum track from a pair of USB headphones.

    What ACTUALLY Happens
    Logic won't accept both the Headphones and the XLR Mic at the same time. Because the headphones have a built in mic, and therefore Logic wants to use it to record. Any help would be greatly appreciated, thanks.
     
  2. Codemonkey

    Codemonkey Well-Known Member

    This USB headset is of course, based on MME drivers.

    Kristal will let you record from a given source and output to another source (but I don't have an ASIO driver so I can't test if it lets you stream from ASIO to MME).
    Anyway if Kristal can do it, why can't Logic? Or can it?
     
  3. ouzo77

    ouzo77 Active Member

    logic is a mac application and uses core audio, not asio or mme.
    you can only select one audio device in logic, but you can combine 2 or more devices in osx, so you can use them together in logic.

    http://www.apple.com/pro/techniques/aggregateaudio/
     

Share This Page