1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Low End Frequency issues with my RNC!

Discussion in 'Recording' started by Digger, Sep 6, 2005.

  1. Digger

    Digger Guest

    OK - I finally broke down and bought an RNC based on all the rave reviews in and about this site. I tested the unit out on my Drum Bus - There was an immediate and very noticeable hype in the high end and the low end all but dissappeared. Anyone else have this same expereience? I know enuf to understanding that different settings will have an effect on freq. but I don't think that is the problem. Any feedback wud be appreciated, thanks.
     
  2. Kurt Foster

    Kurt Foster Distinguished Member

    Digger,
    I have never heard that complaint before. The RNC is unbalanced, which in the past has been reported to cause some issues to arise.

    It sounds to me like what you are hearing is related to incorrectly wired cables or patch bay connections.
     
  3. Digger

    Digger Guest

    You might be right, the guy who wired up my patch bay, I am almost positive, assumed the connections were TRS - that was so obvious I overlooked it, thanks.
     

Share This Page