1. Register NOW and become part of this fantastic knowledge base forum! This message will go away once you have registered.

Lucid A/D9624 and 2408 spdif noise

Discussion in 'Recording' started by Linwood, Jan 19, 2002.

  1. Linwood

    Linwood Member

    Hi Guys: I can't figure this one out. Please help me. My set up is: d8b,lucid genx6,lucid A/D9624, and a 2408. My problem: I'm getting noise on the left side of the spdif input on the 2408(spdif 1). Spdif 2 works perfectly. It's not the A/D9624. I can take the spdif out of the 9624 and go to a DAT and it's clean. I can also take the AES/EBU out and that is clean. I can go from the spdif out of my DAT into the 2408 and it works perfectly. When I go spdif out of the 9624 to spdif in on the 2408, I get noise. Only on the left side. I first thought it was the A/D 9624 and sent it back to Lucid. It tested fine there and they sent it back and from all the tests that I've done here, it does seem to be OK. Maybe I'm just an idiot. Good possibility. Everything is wired with apogee clock cables and monster spdif cables. I have checked all the cables. If I need to record something in mono, I can use spdif 2 in and it works great. If I need to do stereo and choose spdif 1-2, I get noise on the left side. Do you have any idea what this could be??
    Thanks!!
     

Share This Page